Technical advice: 021 450 60 70 · Fast delivery nationwide · Blog

Blocator.ro
Offers
021 450 60 70 Contact

For companies and public institutions: purchasing via SEAP / SICAP details

Product categories
OffersSee discounts ›
Truck Path: How to choose the model after the wheel and where to keep it

Protection and parking

Truck Path: How to choose the model after the wheel and where to keep it

A truck stop keeps the vehicle in place when the parking brake does not arrive alone: at the loading ramp, in the slope or in the service. It looks like a small accessory, but the right choice depends on the size of the wheel, the material and the place where you keep it on the vehicle.

In short: E36 or G36 for R15 and R16 wheels, G46 for R17.5 wheels, each with its support, to always have the ride at hand, next to the wheel.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The right chair has the size of your wheel and sits in a fixed support, easy to reach from the cabin or next to the chassis. Polyethylene models weigh a little and do not rust, and the G36 metal version offers a robust alternative for R15 and R16 wheels. Place the stopover at each ramp or slope and periodically check its condition, especially after winter. Choose the right grade and support from the Wheel Path category, after the size of the wheels in your fleet.

A truck ride has only one role: to prevent the wheel running when the vehicle is parked. However, the moments in which it matters differ a lot. It could be a loading ramp, a slope yard or a service shop. In this guide you see how you choose the right model in the category Wheel path And how you use it properly.

When you need a truck stop

The parking brake remains the first measure. However, in certain situations, a physical barrier in front of the wheel adds additional safety. Here are the typical moments:

  • at the loading ramp, when the stacker enters and exits the trailer;
  • at mountain parking, in particular with heavy goods;
  • in service, when the mechanic works under the vehicle;
  • the coupling and decoupling of the trailer.

For example, at the ramp, each entry of the stacker gently pushes the vehicle. Therefore, a wheel locking wheel stops the gradual movement of the trailer to the ramp. Thus, the loading deck remains properly supported.

How to choose the truck path after the wheel

The basic rule keeps the radius of the wheels. A too small horse does not lean properly on the tyre and can slip. Instead, a suitable track follows the curve of the wheel and takes over the load on a large surface. From the category you can choose three models:

  • E36 grade, Of polyethylene, fits the wheels R15 and R16;
  • for wheels R17.5 choose Range G46, all of polyethylene;
  • Range G36, of metal, cover all R15 and R16 wheels.

So, first check the inscription on the tyre flank. Then choose a truck path that matches the race. If the fleet has different vehicles, note on each support what model it contains.

Mixed fleet

Many companies also have self-utilization, and larger trucks, with different wheels. In that case, don't buy a single model for everything. For example, a R16 wheel van receives E36 or G36, and a R17.5 wheel truck receives G46. At the same time, it keeps a simple record: number of plates, wheel size and model of the horse.

Polyethylene or metal for a truck

Both materials do their job, but they have different characters. High density polyethylene weighs a little and does not rust. Also, don't scratch the paint of the chassis when you sit in the support. Metal, instead, resists shock well and tough handling. Therefore, the choice keeps the working habits. For daily use and fast handling, many drivers prefer polyethylene. On the other hand, in workshops where the bridge is a long way off, the metal version can withstand hard treatment.

Where do you keep the truck path?

A horse thrown into the cabin rarely leaves in time. Therefore, each model has a dedicated support, mounted on the chassis or on the body. For model E36 exists support E36, Of polyethylene. Similarly, the G46 model has G46 support, and the G36 metal track has a metal support.

  • Mount the support where the driver reaches easy, without leaning under the vehicle;
  • avoid hot areas, such as near evacuation;
  • verify that the support is caught in periodic reviews.

Thus, a truck stop arrives at the wheel in seconds, not after a cabin search.

How you sit properly a truck path

First, stop the vehicle and pull the parking brake. Then place the tyre-stick on the side to which the vehicle could run. On the slope, that's the part of the valley. Later, check if the base of the path is on a flat surface, without stones or ice beneath it. Finally, at the start, take the cove out and put it back in the support before starting.

At the same time, the loading ramp sets a simple rule for the entire team. Who puts the cala in and takes it out. The operator of the stacker, instead, checks its presence before entering the trailer. In other words, a wheel lock only works if everyone respects the same routine.

Safety at the ramp keeps the whole team

A truck stop gives the best results in a clear organization of the ramp. It also counts the route of the stackers, and the markings, and communication between the driver and dealer. For vehicles carrying dangerous goods, check the equipment required with the safety adviser. Official information about safety at work can be found on the website Labour Inspectorate. The final solution for your ramp is to establish it after the risk assessment.

In addition, you use other solutions in car parks. There, Wheel stoppers I'm stopping the car before the wall. For an overall image, see category parking solutions. Thus, the trucks remain on heavy vehicles, and the parking stops.

Maintenance and replacement

The paths work in dust, mud and salt road. Therefore, clean them from time to time and check the contact surface. A cracked horse or broken edge leans weaker on the tyre. In that case, you mount a new truck horse without waiting for an incident. It also controls the support, because a weak grip can lose the roadway.

Frequently Asked Questions About Truckway

How many ways do I need on a vehicle?

Usually at least one, and for increased safety, two. Thus, you can block the wheel on both sides.

Can I use the E36 on R17.5 wheels?

It's not the right option. For R17.5 choose the G46, according to the size of the wheels.

Is the stand sold separately?

Yes, E36, G46 and G36 supports appear as separate products. So, made to order, you check both codes: the truckway and its support.

How do I check the wear of the path?

Look for cracks, broken edges or deformations. In this case, you replace the play, because a damaged horse slides easier.

For a truck ride suitable for your wheels, it falls into the category Wheel path and compare models with their supports. The Blocator.ro team helps you choose the right path and support for your fleet.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).

Video clips played directly on YouTube (Google). When playing, YouTube can store data in the browser.