
Cones for the construction site with indicator: how to signal a work
Cones for the built-in indicator plant transmit to the driver two information at once: where the obstacle is and what manoeuvre must be done. A set of 600, 750 or 900 mm cones and a blinding panel, attention or access prohibited shall be mounted quickly and moved with the work.
In short: warn of time, guide the bypass, close the area and check visibility, following the plan requested by the road manager.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A set of cones with indicator shortens the layout time of a work and makes the message easy to understand for drivers. Choose the height of the cone after the speed and distance of visibility, then the indicator after the required maneuver: bypass, attention, forbidden or compulsory left/right access. The final signalling plan shall establish it together with the road manager. See all the kits available in the category Sets cones.
Cones for the construction site with indicator help you quickly signal a temporary work. The cone marks the obstacle, and the panel clearly says what the driver has to do. Thus, no more separate pillars, bases and indicators. In this article we see how you choose the set, how you sit on the ground and how you keep visibility day and night.
First of all, an important clarification. For a public road, the signaling plan establishes the road manager, usually together with the road police. It therefore uses the advice below as a practical benchmark, not as a substitute for the opinion requested.
What you get in a set of cones for the yard
A typical kit brings together a traffic cone and an indicator that catches on to it. Category Cone sets For example, you find 600, 750 and 900 mm cones. Messages vary according to situation:
- Right side bypass;
- access prohibited;
- left/right, face-to-face compulsory;
- attention, for general hazards;
- priority for reverse circulation;
- speed limitation 30 km/h or STOP, to the higher variants.
For example, set of 600 mm with right side-marker solves the classic situation of a pit on the right-hand side. Besides, the pieces come right between them, so the assembly takes a few seconds.
Height of a traffic cone with indicator: 600, 750 or 900 mm
The height shall influence the distance from which the driver observes the signal. A small cone usually arrives for parking lots and internal roads. Instead, on the streets with higher speeds, you need a higher overall.
- 600 mm – premises, parking lots, storage yard, short interventions;
- 750 mm – urban streets with moderate traffic;
- 900 mm – areas where you need visible signal from afar, such as large entrances to the yards.
However, at construction site cones the final choice depends on the requirements of the approved plan. So, check before the size of the administrator asks you to.
Order of location on the ground
A good signal works like a story read from a distance. First, the driver finds out he's following a danger. Then he gets the instruction. Finally, he sees the area closed.
Warning area
The first set of cones for the yard stands the furthest from the work. That's where it fits 600 mm package with warning indicator. If the road allows higher speeds, add a limitation, such as 900 mm package with indicator 30 km/h.
Deviation zone
Follow the cones that drive traffic past the obstacle. Here you use the bypass indicator or required left/right kit, front-to-back. The two-sided panel allows you to change direction without another product.
Working area and access closure
When entering the perimeter itself, chicken Access-indicator kit not allowed. Between the indicators, simple construction cones mark the continuous line of the deviation. At the same time, it keeps a constant distance between them, so that the line can be easily read.
How to use cones for the yard day and night
Daytime, the fluorescent color usually comes. At night, however, it counts the reflective tapes and their cleanliness. For example, soiled construction cones or mud are losing much of their effect.
- periodically delete the reflective strips;
- orient the indicator perpendicular to the direction of travel;
- check the evening if the headlamps catch the panel;
- Add warning lamps, especially where the plan requires them.
In addition, the rain and fog greatly reduce the distance of visibility. Therefore, under such conditions, it increases the distance between the warning and the work area, as planned.
Switching signaling with work
A lot of work is progressing throughout the day. The signal must therefore be moved with the team. An easy set of cones for the construction site makes a difference because one man moves it effortlessly.
First, move the warning signs, then the detour cones. In the end, you move the work area. Thus, drivers do not meet any portion without signal. At the end of the day, you gather everything in reverse order, that is, from the work to the warning.
At the same time, note how many sets you put and where. In other words, the evening inventory shows you if there's any forgotten cones left on the way.
Frequent errors with construction cones
A lot of trouble comes up in a hurry. Here are the most common ones:
- indicators placed too close to the obstacle, without reaction time;
- wind or large-vehicle current cones;
- contradictory messages, such as right bypassing the left obligatory;
- signal left on the spot after completion of the work.
Also, do not use these sets as physical barriers. They warn and guide, but they don't stop a vehicle.
Traffic kit cones or separate parts
A set made ready saves time on each move. The cone and indicator come right, so don't look for adapters. On the other hand, in long works you can combine sets with signalling and steering cones Simple. For detours in parking lots, see and base and indicator frame sets.
For general traffic rules, official information is available on the website Romanian Police. In other words, your set must uphold the rules, not contradict them.
Frequently Asked Questions about Cones for Shipyard
Can I use the 600 mm set on the street?
For slow streets and short interventions, often yes. However, the decision belongs to the approved signalling plan.
How do I transport more sets?
Unscrew the indicators and stack cones for the yard over each other. Thus, you occupy a little space in the self-utilitarian.
What indicator do I take if I have one?
The warning indicator covers most warning situations. Instead, for deviations you need bypass or mandatory.
Can I use them in private parking?
Yeah. For example, the set with the place indicator reserved for disabled people helps to temporarily reserve a place.
Find indicator construction cones in all three heights in the category Cone sets. The Blocator.ro team helps you choose the right combination for your work.


















