Technical advice: 021 450 60 70 · Fast delivery nationwide · Blog

Blocator.ro
Offers
021 450 60 70 Contact

For companies and public institutions: purchasing via SEAP / SICAP details

Product categories
OffersSee discounts ›
Speed bump cap: role, replacement and compatibility

Speed bumps

Speed bump cap: role, replacement and compatibility

A speed bump cap closes the heads of a roadway-mounted limiter. Without it, the wheel suddenly climbs the middle element's muzzle, and the edge is quickly used. The cap makes the passage gradually, completes the colour alternation and changes separately when it touches.

In short: the cap closes the cap cap, must have the same height and width as the elements and change separately.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The heads look like a detail, but they decide how the limiter looks and how it behaves over time. Select the cap after the height and width of the existing elements, keep the yellow-black alternation for visibility and immediately replace the cracked or detached parts. Thus, the limiter remains compact and safe for wheels, and the repair is done quickly, without changing the whole. You find plastic and rubber caps, plus middle elements, in the speed bunps category.

One cap speed bump Close the limit on both ends. Many look at it as a decorative piece. In reality, the cap protects the edge of the elements, guides the wheel and gives a finished look to the whole set. It is therefore worth knowing how you choose it and when you change it.

What role does a speed bunp cap have

The limiter is composed of middle elements, placed next to each other, and of two heads. The middle element has straight side ends. Endless, a wheel that passes the edge hits this bump directly. Instead, the lid has a rounded shape that gradually descends to the asphalt.

  • closes the whole and prevents the wheel from hanging on the edge;
  • protect the muzzle of the last middle element;
  • point out where the limiter ends;
  • Especially at night, it helps the driver see the width of the obstacle.

Plastic Speed Bump Cap Models

The Ustun range includes 250x100x50 mm plastic caps. For example, UT 9021 yellow and UT 9023 black the same height as 50 mm. Thus, they match the middle elements of the 250x350x50 mm Ustun, such as UT 9020 yellow or UT 9022 black. However, check the file of each product before ordering.

Rubber Speed Pumps Cap

The tire better absorbs repeated passages. For example, rubber cap 300x150x45 mm yellow there is also black. In addition, you will find MFK 400x300x45 mm cap, 400x250x45 mm cap or 300x600x45 mm cap. For the 40 mm limiters, there is the Zeplin ZT40401 model of 400x100x40 mm.

Capac for one meaning

A separate case represents him Enerji single-way cap, 500x90x60 mm. It has a height of 60 mm and a different profile. Therefore, you only use it with compatible elements in the same range.

Compatibility of dimensions

The basic rule sounds simple: the cap must be the same height and width as the middle element. A 45 mm speed bump cap next to a 50 mm element leaves a step. This step hits the wheel and breaks over time. So, first measure the existing elements.

  • measures the height of the middle element;
  • then measure the width in the direction of walk;
  • check the position of the catch holes;
  • Finally, you compare with the dimensions in the name of the cap.

Also, stay as far as possible at the same brand. Among the different manufacturers, the profile of the coupling often differs, even at the same height.

A practical example helps. You've got a 50 mm element Ustun limiter and you want new heads. In this case, you are looking for a 50 mm Ustun speed bunp cap with a width of 250 mm. On the other hand, at a 45 mm rubber limiter, choose a rubber cap with the same height. If you don't find the original mark, send us the dimensions and a photo of the combination.

Color alternation for visibility

Most limiters alternate yellow with black. Thus, the driver sees the rhythm of the colors and understands that it follows an obstacle. At the same time, the yellow heads clearly mark the edges. If an element fades, the rhythm breaks and the limiter becomes harder. In this case, replace the piece with one of the same color.

How to change a limiting end, step by step

The replacement of a end takes a little time, but requires attention to safety. First, close the access to that tape with a few cones. Then you unlock the screws of the old cap. If a rusty screw does not come out, use a degreasing spray and wait a few minutes.

  • Remove the old speed bump cap and clean the dust and gravel from under it;
  • check that the old asphalt holes are still dibs;
  • If the holes have widened, you make new holes, easily descaled;
  • sit the new cap glued to the last middle element;
  • Finally, tighten the screws evenly without cracking the plastic.

After assembly, slowly pass with a car over the end. Thus, feel immediately if there is any step or game left. Also check again the collection after a few weeks of traffic. A well-caught speed bunp cap does not move and does not make noise when passing the wheels.

However, if the middle elements also show cracks or cracks in the holes, they change the whole. In this case, a complete set costs less time than repeated repairs.

When you replace a speed bunp cap

The heads get more hits than the middle, especially at tight turns. Therefore, check them several times a year. Change a speed boom cap when you see:

  • missing cracks or pieces;
  • weak screws or enlarged holes;
  • deleted color, which is no longer visible at night;
  • a visible step towards the neighbouring element.

For a new, complete installation, see Speed bubbles sets. If the same path passes through and cables, watch and cable protection. On public roads, the location of limiters shall be established by project and with the agreement of the road manager. For the legal framework, consult National legislative portal.

Frequently Asked Questions about Speed Bump Cap

Can I just put on new heads without changing everything?

Yeah, if the middle elements look good. However, check the height and holes before ordering.

How do I fix the cap?

Usually, with screws and dilutes in asphalt or concrete, through the holes of the cap. Gather them again after the first few weeks.

Plastic or rubber?

The plastic remains easy and compatible with the Ustun range. Instead, the tire better absorbs the passings.

How many hats do I need?

Usually, two for each limiter, one for each end. However, keep one or two spare caps in the storeroom. The heads are used first, especially at the entrances where the cars turn. Thus, you quickly replace a hit piece and the limiter remains complete. In addition, keep a few suitable spare screws.

Complete Limiter

In conclusion, a speed bunp cap suitable as size prolongs the life of the entire limiter. See helmets and middle elements in category Speed bumps. Blocator.ro team helps you choose the speed bunp cap compatible with your installation. Then come back in category of limiters for spare parts.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).

Video clips played directly on YouTube (Google). When playing, YouTube can store data in the browser.