
Base and indicator pillar: temporary detours in parking lots and enclosures
A base and indicator pillar collects the delimitation and message for the driver in a single set. You sit it where an obstacle has to be avoided, where the passage is given, or where speed has to be reduced. Ustun sets of 1100 mm light base and 1200 mm heavy base cover short turns in parking lots and enclosures.
In short: 1100 mm light base for indoors, 1200 mm heavy base for outdoors, indicator chosen after the driver's required manoeuvre.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The complete set saves you from searching for compatible parts and puts the message exactly at the driver's eye. Choose the base after wind and the frequency of movements, then the indicator after manoeuvre: bypass, stop, priority or speed limitation. On public roads, the signaling plan shall be established by the road manager and the authorities. The heavy base sets remain stable and overnight. See all the combinations in the category Stable Sets.
A base and indicator pillar turns a simple delimitation into a clear message for the driver. Not only do you close an area, but you look and what the one who gets there must do: bypass, stop, slow down or give in. In addition, the Ustun sets gather the same pillar, base and indicator in the same package. So, you're not looking for pieces that fit each other anymore.
What a base and indicator pillar contains
Each set has three components. First, the base holds the vertical pole and leaves it mobile. Then the pole lifts the message to the height of the look in the car. In the end, the teller makes it clear what the maneuver is going on. Category Stable sets group two main configurations:
- 1100 mm light base pole;
- 1200 mm heavy base pole.
At the same time, on each configuration you find more indicators. Therefore, choose the base first and then just the message.
Base and indicator pillar: light to 1100 mm, heavy to 1200 mm
The light base moves fast, which means it can move one person. That's why you choose it in underground parking lots, halls or wind-free courtyards. There the position of the pole changes frequently, especially in crowded hours.
On the other hand, the light base remains a good option and out, for short interventions, while someone oversees the area. Instead, for sets left overnight, the heavy base offers more peace.
The heavy base keeps the set more stable on the outside. The indicator catches wind like a small sail, so a base pillar and indicator mounted outside needs weight. In addition, the 1200 mm height lifts the message above the hoods of the parked machines. So, for large, open parking lots, we recommend heavy configuration.
What indicator do you choose for the pillar
First of all, the message depends on the maneuver you ask the driver. In the offer you will find, among other things:
- occlusion on the right or left, for example set of 1100 mm for right bypass or 1200 mm heavy base version;
- priority for reverse circulation, Like 1100 mm kit with priority indicator;
- STOP, through 1200 mm package with STOP indicator;
- speed limitation to 30 km/hWith 1200 mm dedicated package;
- obligatory left/right side, narrow road and attention.
On a base and side-side marker, the message helps especially on the double-sensing alleys. Thus, both directions see the message without the second pillar.
Temporary diversion of traffic in a parking lot
Let us take a concrete example. In a company parking lot, a team is repairing an asphalt area on the main alley. Therefore, machines must pass the work without entering it.
- First, put an indicator ‘attention to entry into the alley, so that drivers slow down.
- Then, at the end of the work, you sit a pillar with base and indicator for free side bypass.
- If the driveway narrows to a single band, add the priority indicator for a meaning.
- In the end, close the edge of the work with simple pillars or cones.
In other words, each pillar tells a part of the story. Thus, the driver reads the messages in a row and gets naturally on the right track.
Base pillar and indicator or separate parts?
Separate parts seem flexible, especially at the beginning. However, there are many compatibility problems: catch does not match, height is too small, and the base does not face the indicator's weight. Instead, a complete set comes with components designed to work together.
On the other hand, if you just need delimitation without a message, you get the posts in the category rigid pillars. For long routes, complete with cone sets with the indicator. Therefore, combine sets after each point's role.
Placement of a base and indicator pillar on the ground
First, the driver must see the message before the manoeuvre, not at the moment. That's why you sit the sign a few meters before the obstacle, not stick to it. Also check not to cover parked cars, lighting poles or vegetation.
At the same time, it takes into account the difference between private premises and public roads. For example, in a parking lot you organize the movement yourself. However, on a public road, temporary signalling follows the plan approved by the road manager and the requirements of the authorities. For general rules of movement, please consult the website Romanian Police.
Daily checks for a base and indicator pillar
A temporary set stays out for days, sometimes weeks. It is therefore worth a short check at the beginning of each day.
- First, check whether the pole remained vertical and in the initial position.
- Then clean the face of the dust, mud or snow indicator.
- In addition, make sure no one turned the indicator back to another direction.
- Finally, check if the message matches the situation in the field.
The last point counts especially at the end of the work. A pillar with a base and indicator remaining on the spot after completion of the work misleads the drivers. So, you raise the set as soon as the obstacle disappears. Thus, drivers learn that the messages in the room always tell the truth.
Frequently asked questions: base and indicator pillar
What basis do I choose for a windy yard?
In this case, choose the 1200 mm heavy base configuration. The weight shall compensate for the area of the indicator exposed to the wind.
Can I change the sign later?
However, each set has its indicator. For another message, we recommend a separate set, to always have the signal ready.
Do they use the same set day and night?
Yeah, but at night you're checking the lighting of the area. If the place remains dark, add reflective elements around the obstacle.
How many times do I need a base and indicator pillar at a detour?
Usually two or three: one warning, one for bypass and, if necessary, one priority. Then the rest of the route you delineate with simple pillars.
See all combinations in category Stable sets. If you don't know which base and indicator pillar fits your premises, Blocator.ro team helps you choose.



















