Technical advice: 021 450 60 70 · Fast delivery nationwide · Blog

Blocator.ro
Offers
021 450 60 70 Contact

For companies and public institutions: purchasing via SEAP / SICAP details

Product categories
OffersSee discounts ›
Protection of the corners in storage: dimensions, colours and anchorage

Protection and parking

Protection of the corners in storage: dimensions, colours and anchorage

The protection of the corners in the warehouse matters because the walls, the poles and the shelves receive the first blows from the stackers. A metal protection from the pipe, anchored in the wall, takes the impact before the structure and attracts the driver's gaze through warning colors and reflective strips.

In short: choose the arms after the hit area, height after the machine, pipe 60.3 or 76.1 mm and a color that contrasts with the flooring.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A metal protection for the well-chosen corner saves your walls, hall pillars and repeated repair shelves. Measure the area hit, choose short or long arms, the height suitable for the machine and a visible color on your floor. Then anchor it solidly in concrete and check the anchors after each powerful impact. For doors and machinery complete with protective poles. See all dimensions in the Protections for Corners category.

The protection of the corners in the warehouse starts from a simple observation: the corners hit the first ones. A tightener that turns tightly first touches the wall, shelf, or stake. The strike seems small, but it repeats every day. Therefore, in time the concrete is chipped, the climbers are deformed, and the risk increases for everyone.

Why it matters the protection of the corners in the warehouse

The corner is the point where two tracks meet. The stirrup driver sees the mud hard, especially with goods on forks. In addition, the back of the machine sweeps a larger bow than many expect. Therefore, the corners of the color intersections receive the most impacts.

A metal shield takes the hit before the structure. Thus, you repair or replace the protection, not the wall or shelf. For general principles of security in warehouses, consult resources European Agency for Safety and Health at Work.

What a metal protection for the corner looks like

Category models protections for corners have the shape of L. Thus, two arms hug the mutt, and the legs attach to the floor. At the same time, the size has three values: length of the first arm, length of the second arm and height. For example, 800x800x400 mm means arms of 800 mm and height of 400 mm.

The manufacturer uses two pipe diameters:

  • 60.3x3 mm, for most stores and storerooms;
  • 76.1x3 mm, For areas where you want a more massive structure.

Choice of size for the protection of stores

First, measure how far the area is spread over each side. A narrow hallpost receives compact protection, such as model 400x400x400 mm of pipe 60.3 mm. Instead, a corner of the wall exposed to wide turns requires long arms, for example variant 800x800x400 mm.

Then choose the height. Usually, low protections, 400 mm, stop the wheels and the bottom of the machine. However, if the stacker can reach above with forks or goods, it deserves a high variant. Range includes heights of 600, 800, 1000 and 1200 mm, such as model 800x800x1200 mm. Therefore, the protection of the corners in the warehouse adapts both to the corner and to the machinery.

Warning and visibility colours

The color doesn't just have an aesthetic role. In addition, it attracts the driver's look before turning. Range offers three combinations:

Therefore, choose the color that contrasts with the flooring and walls. For example, on an open grey flooring, the yellow is better highlighted. On the other hand, the galvanized version copes well with the wet or outdoor areas, near the ramps.

Where you mount a corner metal protection

  • the corners of the walls at the intersections of colour;
  • the hall pillars next to the machinery tracks;
  • the shelf heads at the corner of a corridor;
  • the corners of the offices or cabins inside the hall;
  • the slopes from the entrance to the ramps and the cold rooms.

So, any corner around which turns a machine is worth checking. A useful exercise: you follow a day's trail of the stackers and note where traces of paint or scratches appear. There you start protecting the corners in the warehouse.

Wall anchoring

The protection only works if it stays fixed. That's why you anchor it in the concrete flooring with anchors suitable for concrete thickness and quality. Then leave a small space between the protection and the corner. Thus, at impact, the pipe deforms without pushing directly into the wall. In addition, check the anchors periodically, especially after a heavy blow.

Frequent errors in the protection of stores

Some mistakes greatly reduce the effect of protection. First, many choose arms too short, and the machine hits the wall immediately after the end of the pipe. Then, some mount corner-stick protection without deformation space. In that case, the shot goes straight into the wall. It also happens that protection reaches the right turn, so that it becomes itself an obstacle.

On the other hand, some give up the warning color and choose a shade that is lost on the floor. Therefore, the driver sees protection too late. In the end, many forget about the checks. Doubted protection after a strong impact no longer offers the same reserve, so you replace it in time.

What do you do with a metal corner protection after an impact?

After any serious hit, stop traffic in the area for a few minutes and check three things. First of all, the shape of the pipe: a large deformation shows that the protection has consumed its reserve. Then the anchors: if they are weakened, you will gather them or remake them. In addition, check the corner behind the protection to see if the impact has reached it. So, you know from time to time whether you need to move the protection or choose a higher or more massive model.

Protection of stores in a complete plan

However, the corners represent only part of the risks. For doors, electrical boards or machinery, complete with protection posts. For shelf heads, hydrants or ducts, choose protection defenders The bow guy. In other words, think about protecting the corners in the warehouse throughout the route, not just on time.

Frequently Asked Questions about Corner Protection in Warehouse

What diameter of pipe do I choose?

For most corners, the 60.3 mm pipe faces. In areas with heavy traffic of heavy machinery, we recommend pipe 76.1 mm.

What height do I need?

If the risk comes from wheels and chassis, reach the height of 400 mm. When the goods or forks can hit above, choose 1000 or 1200 mm.

Can I mount the protection on the asphalt?

We recommend, in particular, a solid concrete base for anchoring. For other surfaces, ask our opinion before ordering.

Discover all sizes and colors in category protections for corners. If you don't know what metal protection for the corner fits your coat, Blocator.ro team helps you choose.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).

Video clips played directly on YouTube (Google). When playing, YouTube can store data in the browser.